The RPS-SPL4 allows you to reboot multiple PC's and devices from your home, office, on a holiday or in the middle of the night It will eliminate prolonged downtime, travel expenditures and other costs associated with a person physically rebooting your PC or other device. You can reboot a crashed PC from any computer on the Internet using the Web-based GUI and an Internet browser or Telephone the unit for an out-of-band solution. In its Tier 3 version, the unit can monitor an internet device via ping, and reboot that device by cycling the power upon failure.

What are the electrical specification of the RPS-SPL4 Remote Power Switch?

There is a 15 amp max. for all ports with a 6 Amp maximum per individual port. 4 switchable electrical ports are on the RPS-SPL4 unit. 110-120V US.

Do you have a European Version of the RPS-SP4L available?

Please check with our sales department at sales@deltronix.com .

What are the dimension of the RPS-SP4L Unit?

13.1" Wide x 6.02" Deep x 1.75" Thick. Weight is approx 3.53 lbs.

Does the remote power control unit RPS-SP4L require any drivers for operation?

The RPS-SP4L does not require any drivers, making it compatible with any operating system. You just need a web browser to access the built in webserver or you can access the power control functions via a telephone.

If you forget your password, press the reset button next to the Phone/Network LED. It will reboot the device and set the user name to admin and password to admin and telephone password to 123456. The IP address of the unit will also revert to 192.168.1.10

I can't connect to the default IP address configured at 192.168.1.10. Sometimes I can, but then the connection 'goes away'. Help!

This happens when you do not have a 'gateway address' set in the remote power controllers network configuration screen *OR* the gateway address is incorrect. You need to set the Gateway address to that of your router on the same subnet as the RPS-SPL4. For instance, if you are using the factory default settings of 192.168.1.10, netmask of 255.255.255.0, the gateway would usually be set to 192.168.10.1. The IP Address of 192.168.10.1 would be the IP address of your router/switch.( It does not necessarily have to be 192.168.10.1, but should be the whatever IP address that you have configured for the router.)

What is the warranty period on the RPS-SP4L?

The remote power switch comes with a one year warranty against manufacturing defects. The warranty is not applicable if the device has been exposed to power surges, the case opened, improper installation or mishandling.

After booting up my Windows Computer, how do I get the computer to logon automatically so I don't have to enter my user name and password?

For Automatic Logon for Windows see the following Microsoft Knowledge base articles HOW TO: Turn On Remote Desktop Automatic Logon in Windows XP, How to Enable Automatic Logon in Windows NT 3.x and 4.0 , HOW TO: Enable Automatic Logon in Windows 2000. If you want to disable automatic logon at some future point see Bypassing Automatic Logon in Windows NT. For Windows 95/98 automatic logon see How to Prevent a Windows 95, Windows 98, or Windows Me Logon Prompt at Startup for instructions!

YES. Shipping/Handling is $65.00 for the first unit and $15.00 for each additional unit. ORDER HERE!

YES, the default password for login is admin and user name is admin . The interface allows you to easily change the password of the unit to whatever you desire. View the CHANGE PASSWORD screen by clicking here.

Well, there is not any! Devices such as this typically sell for over $500. WE OFFER A 30 DAY MONEY BACK GUARANTEE and a ONE YEAR WARRANTY for orders shipped in the USA and CANADA!

We have been selling inexpensive high quality remote access devices since 1990.

YES Click Here! For full information.